Oce TCS300, User Manual

Page: 157 / 190

157
Remove jammed media
Remove jammed media
Introduction
When a media jam occurs, the system produces a double audio signal. The red LEDs
of the printer operator panel remain illuminated. When a jammed media error occurs
on the system, immediately remove the jammed media to prevent damage to the
printer.
The system handles the error recovery for the jammed media through a series of
dialogue boxes. Use the following procedure to remove the jammed media.
How to remove jammed media
Attention:
Never use a knife to cut loose the jammed media. When you use a
knife to cut loose the media, you can damage the printer.
1.
Open the cover or door that the printer operator panel indicates.
[98]
2.
Use a pair of scissors to cut loose the media.
3.
Remove the jammed media from the output side of the printer.
[99]
4.
Press the softkey for 'Done' to confirm that you removed the jammed media.
5.
Close the cover or door that the printer operator panel indicates.