Oce TCS300 User Manual Download Page 45

Page: 45 / 190

Define the display language of the Océ TCS300

How to change the display language on the on-line screen of the printer operator
panel

Note:

Only the first language (default language) and the second language

(alternative language) defined in the Océ Settings Editor are available on the
operator panel.

Use the upper softkeys to select the 'System' tab.

Press the lower right softkey to toggle between the first language and the second
language.

[32]

[32] Press the lower-right softkey to change the language

How to change the display language on the off-line screen of the printer operator
panel

Note:

Only the first language (default language) and the second language

(alternative language) defined in the Océ Settings Editor are available on the
operator panel.

Press the on-line / off-line key to set the printer off-line.

Use the upper softkeys to scroll to the 'Language' card.

[33]

[33] The language card on the off-line screen

Press the softkey below the 'Language' card to toggle between the first language and
the second language.

Summary of Contents for TCS300































































































































































































Search results

Summary of Contents for TCS300

Reviews:

Related manuals for TCS300

Brands by name

Popular brands

Oce TCS300, User Manual

Search results

Summary of Contents for TCS300

Reviews:

Related manuals for TCS300

Brands by name

Popular brands