Oce TCS300, User Manual

Page: 57 / 190

57
Log in as an authorised user
Log in as an authorised user
Purpose
In order to have read and write access for the Settings Editor, you must log in as an
authorised user. There are 3 user roles, system administrator, key operator and power
user who are authorised to edit the settings. You do not need to log in before you start
a session. The system will only display a message when you need to log in to
perform an action.
Before you begin
Access the home page of the Settings Editor. Navigate through the tabs and select
the value of a setting you wish to change.
How to log in as an authorised user
1.
After you click the value of the setting you want to edit, a log in window appears.
2.
You can select a user role from the drop down list.
Note: The user role with the required authorisation is already selected.
3.
Enter the password (default passwords are Key operator: KeyOp, System
administrator: SysAdm, Power user: PowUsr).
Note:
For security reasons it may be useful to periodically change the password for
the 3 access modes (Key operator, System administrator, Power user) to the Settings
Editor.
4.
Click 'Ok' to confirm your entry.
Result
If the password is entered incorrectly, a message appears. You can enter the password
again to get read and write access.
Note: Once you have logged in, the log in lasts for the duration of the browser
session. If you have not been active for more than 30 minutes, the session expires and
you need to login again.