Oce TCS300, User Manual

Page: 153 / 190

153
Overview
Printhead error messages
The table below gives on overview of the printhead-related error codes.
[56]
Error code Description Customer action
4501 - 4509 Excessive leakage current
detected for head [1…9]
Printhead failing
Replace printed [1…9] Replace the printhead by using the wizard.
Note:
Never re-insert a
printhead that has caused this
problem.
4551 - 4559 Head defective during printing Printhead is probably not placed correctly.
Remove and re-insert the printhead at the
original position.
Note: If the problem persists
you must replace the printhead.
4571 - 4579 Head too hot during printing You can ignore this problem by pushing the
'OK' button.
Note:
If the problem re-occurs
after a short time you must
replace the printhead.
4581 - 4589 Head [1….9] keeps heating Replace the printhead by using the wizard.
4951 - 4959 WOM memory failure for head
[ 1……9] Service warning only. No customer
intervention needed.
4961 - 4969 Heating of head [1……9] failed Continue printing until the message
'Replace printhead' displays on the
operator panel.
Then replace the printhead by using the
wizard.