Oce Arizona 365 GT, User Manual

Page: 78 / 234

Roll Media Option Hardware
Introduction
The Roll Media Option (RMO) allows printing on media that is supplied on a roll.
[40] Roll Media Option Components
Component Locations
Roll Media Hardware
Component Function
1) Dual Foot Pedal Switches 6) Media Access Door
2) Media Drive Couplers 7) Media Cut Guide
3) Accessory Holder 8) Media Tension Bar
4) Take-up Media Shaft 9) Vacuum Platen
5) Supply Media Shaft 10) Gimbal
11) Capstan
Hardware Function table
The Roll Media Option consists of a supply media drive, media tension bar, capstan roller,
vacuum platen, media gimbal, and a take-up media drive. This system accurately advances the
roll of media during printing. The roll media is positioned with a high resolution media encoder.
This ensures accurate and high quality prints on various core media.
Roll Media Hardware
Component Function
1) Dual Foot Pedal
Switches The dual foot pedal switches areused to control media feed in both for-
ward and reverse directions. Function varies depending on whether
media is loaded or unloaded.
2) Media Drive Cou-
plers The couplers keep the media shafts in place and engaged to the drive
motor. In the open (horizontal) position they allow the media shafts to
be removed.
4
Roll Media Option Hardware
78 Chapter 6 - How to Operate the Roll Media Option