Oce Arizona 365 GT, User Manual

Page: 163 / 234

Select the name of the Media that you want to use for this Quick Set. See section xxx for
information on how to create a media.
• Print Mode
Always select Quality-Layered Printer Print Mode if you want to use the layered printing
capabilities of theOcé Arizona 365.
Advanced Quick Set Options
To access the Advanced Quick Set Options click the Advanced button. The tabs you need to
access for white ink workflow are:
•
Postscript
In this window ensure that 2-stage processing is turned off in order for Rip to successfully
process your white ink data. Note that the default setting is to not use Two Stage Processing so
it is not necessary to check this each time you create or edit a Quick Set based on the defaults
as long as it has not been enabled in the Default Quick Set.
• Color Correction
This area will link to an existing Filter that has been exported from Preflight's Color Correction
area. From Preflight you can export all the settings made using the Spot Layer Tool or any
other Color Correction parameters as a Filter for use on files to be prepared for white ink
printing. When you link to a Filter the Quick Set will use the same set of parameters that were
present when you exported it from Preflight.
NOTE
Many of the Quick Set and Filter settings for a job can be overridden in RIP-Queue or Preflight, if
desired.
Procedure
1.
In ProductionHouse RIP-Queue select your printer, and click on the Configure Printer button. This
opens the Configure Printer dialog.
2. From the Quick Sets tab, select the Quick Set you want to edit or copy (or select New to build one
from defaults).
3. If you are going to edit an existing Quick Set, Click on Edit. This opens the Edit Quick Set dialog.
4. Make any modifications to the Quick Set that you want to make, and click OK.
NOTE
As a shortcut, click the Edit Quick Set button on the toolbar to edit a Quick Set.
However, you cannot change the Quick Set Name when you use this method.
5. Use the reference material in the start of this section to guide you in the Quick Set configuration.
6. To use any of the Quick Sets that you created, when you open a file in ProductionHouse you can
select a Quick Set from the File, Open dialog box.
7.
You can also create a Filter that will save any of the current Spot Layer Tool settings. The Filter
will also include any of the other current setting under the Color Correction menu. The Filter will
be available for future use with Color Correction or it can be used in a Quick Set.
How to Create and Use Quick Sets
Chapter 8 - How to Work With White Ink 163