Nord Drivesystems SK 180E Series, User Manual

Page: 62 / 212

NORDAC BASE (SK 180E / SK 190E) – Users Manual for Frequency Inverters
62 BU 0180 en-4118
3 Display, operation and options
WARNING
Electric shock
When devices are open, electrically conducting elements (e.g. connection terminals, connection cables, PCBs,
etc.) are freely accessible. These may be live, even if the device has been switched off.
• Avoid all contact.
As supplied, without additional options, the diagnostic LED is externally visible. This indicates the
actual status of the device. In contrast, the AS-i LED (SK 190E) is only visible if the device is open.
The device can be easily adapted to various requirements by using function-extending modules and
modules for for display, control and parameterisation.
Alphanumeric display and control modules (

Section 3.1 "Control and parametrisation options ") can
be used for simple commissioning by means of adapting parameters. For more complex tasks,
connection to a PC system can take place with the aid of the NORDCON parameterisation software.
3.1 Control and parametrisation options
Various control options are available that can be fitted directly to the device or in close proximity to it
and directly connected.
Parametrisation units also provide a facility for accessing the parametrisation of the device and
adapting it.
Designation Part Number Document
Switches and potentiometers
(attachment)
SK CU4-POT
Switch/Potentiometer
275271207

Section 3.2.4 "Potentiometer
adapter, SK CU4-POT"
SK TIE4-POT
Potentiometer 0-10V
275274700 TI 275274700
SK TIE4-SWT
Switch "L-OFF-R“"
275274701 TI 275274701
Control and parametrisation boxes
(Handheld)
SK CSX-3H SimpleBox 275281013 BU0040
SK PAR-3H
ParameterBox
275281014 BU0040
Status LED for AS interface
(SK 190E only)
Device status LED (DS)
RJ12 diagnostic interface
(RS232, RS485)
Diagnostic opening