Nord Drivesystems SK 180E Series, User Manual

Page: 35 / 212

2 Assembly and installation
BU 0180 en-4118 35
2.1.2 Wall mounting
As an alternative to wall mounting, the device can also be installed close to the motor using an
optional wall-mounting kit.
Wall mounting kit SK TI4-WMK-… (…1-K, …1-NSD)
This wall-mounting kit provides a simple method for installing the device close to the motor.
The SK TIE4-WMK-1-K version is made of plastic. It is equally suitable for IP55 and IP66 devices.
The SK TIE4-WMK-1-NSD version consists of stainless steel and elements which are provided with a
special NSD tupH surface treatment. This version is intended for IP69K devices.
Any installation position is permissible with wall mounting, taking the electrical data into consideration.
Si
ze
o
f
devi
ce
Wall mounting kit Housing dimensions
Mounting
dimensions
Total Weight
Approx. [kg]
g2 n p p2 d e ∅
Size 1
SK TIE4-WMK-1-K
113 221 154 205
64 180 5.5
2.2
Part. No. 275 274 004
SK TIE4-WMK-1-NSD
2.6
Part. No. 275 274 014
Size 2
SK TIE4-WMK-1-K
136 254 165 205
3.5
Part. No. 275 274 004
SK TIE4-WMK-1-NSD
3.9
Part. No. 275 274 014
All dimensions in [mm]
Wall mounting kit SK TIE4-WMK-1-EX
This wall mounting kit is intended for use in explosion hazard environments (

Section 2.5 "Operation
in potentially explosive environments "). It is made of stainless steel and is equally suitable for IP55
and IP66 devices