Control System
33
Service Manual – SC1500
Battery Charger
The current battery chargers do not communicate with the A1 control
boad. So this menu function is not applicable. However, for older model
chargers this submenu allows you to specify the battery type in your
machine so the on-board charger will use the charging algorithm that is
compatible with the battery type. If your machine is not equipped with an
older model, SPE, onboard charger, select
NONE
(the default setting).
Burst Of Power Operation
The
4. BURST OF POWER
submenus allow you to enable or disable the
burst-of-power function. When the burst-of-power function is enabled
(
YES
), pressing the Burst Of Power Switch while scrubbing will attempt
to make a temporary increase in the solution flow rate, brush pressure,
vacuum level and detergent flow rate.
The default setting is
NO
PROGRAM OPTIONS
BATTERY CHARGER
NONE
PROGRAM OPTIONS
3. BATTERY CHARGER
PROGRAM OPTIONS
BATTERY CHARGER
WET 25A
PROGRAM OPTIONS
BATTERY CHARGER
AGM DISCOVER 25A
PROGRAM OPTIONS
BATTERY CHARGER
AGM FULLRIVER 25A
PROGRAM OPTIONS
BATTERY CHARGER
WET 15A
PROGRAM OPTIONS
BATTERY CHARGER
GEL-AGM 25A
PROGRAM OPTIONS
BATTERY CHARGER
GEL EXIDE 25A
PROGRAM OPTIONS
BURST OF POWER
NO
PROGRAM OPTIONS
4. BURST OF POWER
PROGRAM OPTIONS
BURST OF POWER
YES
