Squeegee System
108
Service Manual – SC1500
Troubleshooting
Problem
Cause
Correction
Poor water pick-up.
The squeegee blades are torn
or worn.
Check and replace the blades as necessary.
The squeegee assembly is out
of adjustment.
Readjust the squeegee as follows:
1.
Park the machine on a flat, even surface and
lower the squeegee.
2. Drive the machine forward enough to have the
squeegee blades fold over to the rear.
3. Adjust the squeegee tilt by adjusting the Caster
Wheel height so the rear squeegee blade touches
the floor evenly across its entire width and is bent
over slightly. (Also refer to the
Instructions for
Use
.)
Specifications
Component
Specifications
Squeegee Blades
Available
Materials
Red Gum Rubber (Natural Rubber)
Polyurethane/Pentathane
