Scrub System
89
Service Manual – SC1500
8
Remove the
Vacuum Hose
from the
Scrub
Deck
9
Press the rear of the
Squeegee Mount
Bracket
to disengage it from the pins on
the
Squeegee Link Weldment
and remove
the
Squeegee
from the
Scrub Deck
10
Remove the four
Shoulder Screws
holding
the
Lift Plate Weldment
to the
Link Bar
and
the two
Linkage Bars
. Note that you’ll need
to hold the M10 Nyloc
®
nuts with a 17mm
wrench while you remove the
Shoulder
Screws
11
Remove the
Shoulder Screw
and nut that connect
the scrub deck actuator to the
Lift Plate Weldment
on the scrub deck. Note that you’ll need to hold
the M8 Nyloc
®
nut with a 13mm wrench while you
remove the
Shoulder Screw
Vacuum
Hose
Squeegee
Mount
Bracket
Scrub
Deck
Squeegee
Mount
Bracket
Link Bar
Linkage
Bar (2)
Shoulder
Screw (4)
Lift Plate
Weldment
Shoulder
Screw
Lift Plate
Weldment
