Wheel System - Traction
126
Service Manual – SC1500
7
Remove the four
M6 x 25 Screws
and flat washers,
then remove the
Drive Motor
from the
Drive Wheel
Frame Weldment
8
To reinstall the
Drive Motor
into the
Drive Wheel
Frame Weldment
, follow the above steps in reverse
order.
Service Tip:
When you set the chain
tension with the M6
x 35 Idler Adjuster
Screw, adjust the Screw
so the chain deflects
approximately ¼” to ½”
to when pressed with
moderate force.
M6 x 25 Screw (4)
Drive Motor
Drive Wheel
Frame
Weldment
