Control System
32
Service Manual – SC1500
Submenu Functions
Deck Type
The SC1500 can be equipped with two different deck options. The
1. DECK
TYPE
submenus allow you to specify the type of deck installed in your
machine. Note that the type of deck selected configures the solution flow
rate settings corresponding to the deck type.
Low Battery Voltage Cutout
The purpose of the low battery voltage cutout is to help prolong battery
life. The A1 Control Board will raise the deck, and switch off the brush
and vacuum motors, solution solenoid valve and detergent pump
automatically when the batteries discharge to the selected cutout level.
The
2. LOW VOLT CUTOUT
submenus allow you to select the voltage cutout
level for the type of battery installed in your machine:
• The standard cutout setting for wet cell/lead acid batteries is 20.55
volts (80% discharged or 20% charge remaining).
• The alternate cutout setting for gel/maintenance free batteries is 21.75
volts (70% discharged or 30% charge remaining).
The default setting is
WET BATTERY 80% / LVC=20.55V
PROGRAM OPTIONS
DECK TYPE
20 INCH / 51 CM DISC
PROGRAM OPTIONS
1. DECK TYPE
PROGRAM OPTIONS
DECK TYPE
20 INCH / 51 CM REV
PROGRAM OPTIONS
LOW VOLT CUTOUT
WET BATTERY 80%
LVC=20.55V
PROGRAM OPTIONS
2. LOW VOLT CUTOUT
PROGRAM OPTIONS
LOW VOLT CUTOUT
MAIN FREE BATTERY 70%
LVC=21.75V
