Nidek Medical ME-1000, Service Manual, Page: 94 / 134

7 - 8
LLE11ARDA001A/E
7.4.2 Adjusting the feeler AXIS
1. Read the stored lens data of square 45.
(See 7.2.4.)
2. Grind the lens: CR39 by the settings as below.
1) Pattern data
a. Data: stored square 45
b. FPD: 70.00
c. PD: 70.00
d. Size: 3.00
2) Setting in grinding
a. Lens type: CR39
b. Frame type: Nylor
c. Grinding mode: Flat
d. Safety bevel: NONE
e. Polishing: NONE
3. Lightly apply grease (EL-4) or baby powder
on the lens so as to recognize the feeler’s
measuring track. Put the lens into the
processing chamber.
4. Select the processing settings as below on the
layout screen.
1) Frame type: Nylor
2) Grinding mode: Flat
3) Size: 0.00
5. Press the START button to start processing.
6. Press the STOP button to stop processing
when the lens measurement was completed.
7. Verify that the measuring track is parallel to
the lens edge.
%4
5K\G
㪧㪛
㪝㪧㪛
&KURNC[ 4+)*6 .'(6
0[NQT (NCV 010'
'ZVGTP
010' #EVKXG
㪤㪜㪥㪬
4 .
ь
Ǿ ь
Ǿ (2&%748'#0).'
%QXGT
)TGCUG'.
غOO
%4
5K\G
㪧㪛
㪝㪧㪛
&KURNC[ 4+)*6 .'(6
/GVCN (NCV 010'
'ZVGTP
010' #EVKXG
㪤㪜㪥㪬
4 .
ь
Ǿ ь
Ǿ (2&%748'#0).'
%QXGT