Nidek Medical ME-1000 Page 46 Service Manual Download

Page: 46 / 134

4 - 34

LLE11ARDA001A/E

4.8 The Lens Processing cannot be Performed Properly.

4.8.1 Water leaks.

Does the water leak?

Yes

4.8.2 Water does not run.

Does the water run?

Yes

4.8.3 The axis shift occurs.

Does the axis shift occur?

Yes

4.8.4 The processing time is long.

？

加工時間が長いですか

Yes

4.8.5 The bevel position is not proper.

Is the bevel position of the bevel proper?

Yes

4.8.6 The SFB position is not proper.

Is the SFB position proper?

4.8.7 The groove position is not proper.

Is the groove position proper?

4.8.8 An unpolished part is left in the polishing

process.

Is any unpolished part left in the polishing process?

Yes

4.8.9 The drilling position is not proper.

Is the drilling position proper?

Yes

Completion

Yes

Is the processing time long?

Summary of Contents for ME-1000







































































































































Search results

Summary of Contents for ME-1000

Reviews:

Related manuals for ME-1000

Brands by name

Popular brands

Nidek Medical ME-1000, Service Manual

Search results

Summary of Contents for ME-1000

Reviews:

Related manuals for ME-1000

Brands by name

Popular brands