Nidek Medical ME-1000, Service Manual

Page: 91 / 134

7 - 5
LLE11ARDA001A/E
7.2.3.2 Compound
1. When the water is running to the wheel, press the STOP button to stop it supplying.
* Wipe the water when the wheel is wet.
* Do not run the cleaning water while the compounding is being performed. Desired effect of
the compound may not be obtained.
2. Apply a small amount of the (specified) compound to a dry or felt cloth. Touch it to the
polishing wheel which is rotating and polish the surface of the polishing wheel.
3. After touching the dressing stick to the wheel for a few seconds, apply a small amount of
the compound to a cloth and polish the polishing wheel again.
4. Repeatedly perform the steps 2 - 3 several times.
5. After the polishing is completed, run the cleaning water and remove the compound on the
wheel with a brush.
6. Press STOP for the wheel dressing to complete this work.
7.2.4 Reading the lens data
1. Establish the Menu mode and select
Maintenance.
(See 7.1.1.)
2. Read the stored lens data.
1) Circle 45: Press DONE for the Circle 45.
2) Square 45: Press DONE for the Square 45.
3) 50×25mm: Press DONE for the Rectangle
50×25.
4) Lens to check drilling: Press DONE for the
Test Pattern.
5) Lens to adjust the hole depth: Press DONE
for the Drill Adjustment Pattern (Depth).
3. When the stored lens data has been read, the
screen will return to the layout screen.
/GUUCIG%QWPV
'ZEJCPIG
&TGUUKPI
%NGCPKPI
'TTQT*KUVQT[
Maintenance
'0).+5*
5*19
$16*
&10'
&10'
&10'
&10'
&10'
.CPIWCIG
%QXGT$WVVQP
/CKPVGPCPEG/GUUCIG
%KTENG㧠㧡
5SWCTG㧠㧡
4GEVCPING㧡㧜˜㧞㧡
6GUV2CVVGTP
&TKNN#FLWUVOGPV2CVVGTP&GRVJ
'0).+5*
5*19
$16*
&10'
&10'
&10'
&10'
&10'
.CPIWCIG
%QXGT$WVVQP
/CKPVGPCPEG/GUUCIG
%KTENG㧠㧡
5SWCTG㧠㧡
4GEVCPING㧡㧜˜㧞㧡
6GUV2CVVGTP
&TKNN#FLWUVOGPV2CVVGTP&GRVJ
BACK
%4
5K\G
㪧㪛
㪝㪧㪛
&KURNC[ 4+)*6 .'(6
/GVCN #WVQ 2QNKUJ
'ZVGTP
5($ #EVKXG
㪤㪜㪥㪬
4 .
ь
Ǿ ь
Ǿ (2&%748'#0).'
%QXGT