NF EC1000SA, Instruction Manual

Page: 85 / 283

4.2 Measurement of Inrush Current
EC1000SA 4-17
4.2.3 Set measurement display to peak value
Set the displayed current measurement value to the peak value (PEAK).
To change the displayed current measurement value, select “MEASURE” in the MISC menu .
Operation steps
1. Press the or key to move the cursor to the icon, then press the
ENTER
key.
ENTER CANCEL
Cursor
⇒
The MISC menu is displayed.
2.
Press the or key to move the cursor to “MEASURE”, then press the
ENTER
key.
⇒
The selection box is displayed.
ENTER CANCEL
Selection box
3.
Press the or key to move the cursor to “PEAK”, then press the
ENTER
key.
⇒
This sets the measurement display to the peak value (PEAK).
ENTER CANCEL