NF EC1000SA, Instruction Manual

Page: 183 / 283

6.1 Remote Interface
EC1000SA 6-5
3.
Press the
ENTER
key to display the selection box.
ENTER CANCEL
4. Press the or key to move the cursor to “INTERFACE”.
ENTER CANCEL
5. Press the
ENTER
key to complete the setting. Press the
CANCEL
key to cancel the setting.
6. Use a D-sub 9-pin cross cable to connect this product to the computer. The connector is on the rear
of EC1000SA.
Operation steps <2>
Set communication parameter by following steps below.
1.
Open SYSTEM MENU to open “REMOTE”.
ENTER CANCEL