6.3
Command Descriptions
EC1000SA
6-40
g) OUTPut subsystem
OUTPut[:STATe]
This controls on/off settings of the output relay.
Syntax:
OUTPut[:STATe]
<bool>
Parameters:
OFF|0 / ON|1
Command example:
OUTP ON
Query example:
OUTP?
Response format:
<NR1>
Response example:
1
h) INPut subsystem
INPut:GAIN
This sets the external input gain used in the external mode (AC-EXT or AC+DC-EXT) and
in external mode (AC-ADD or AC+DC-ADD). For the 100 V range, the external input
gain setting ranges from 0.0 to 220.0 and for the 200 V range, it ranges from 0.0 to 440.0.
When in AC-EXT, AC-ADD, AC+DC-EXT, or AC+DC-ADD mode, the output waveform setting
cannot be made. ([3, “Invalid in this mode”] error occurs.)
Syntax:
INPut:GAIN
<NR2>
Parameters:
0.0 to 220.0 (0.0 to 440.0)
Command example:
INP:GAIN 10.0
Query example:
INP:GAIN?
Response format:
<NR2>
Response example:
10.0
Summary of Contents for EC1000SA
