NF EC1000SA, Instruction Manual

Page: 54 / 283

3.4 Main Operation Example
EC1000SA 3-23
3.4.4 Setting waveform
The EC1000SA allows to select a sine wave, square wave, or arbitrary waveform (16 types in all) as the
waveform to be output, by using the control panel. Arbitrary waveforms are generated using data
transfers via the USB interface.
See “4.6 Output of Arbitrary Waveforms”
, for details of arbitrary waveforms.
Table3-9
lists the waveforms that can be selected.
Table3-9. Waveform List
As Shown in Operation Panel Type
SIN Sine wave
SQU Square wave
ARB1 to ARB16 Arbitrary waveform (16 types)
Operation steps
To select a waveform, select in the SET menu.
1. Press the or key to move the cursor to the icon.
ENTER CANCEL
Cursor
2.
Press the
ENTER
key to display the selection box.
ENT ER CANCEL
Selection box