NF EC1000SA, Instruction Manual

Page: 266 / 283

9.2 Current Limiter
EC1000SA 9-6
9.2 Current Limiter
a) Output peak current limiter
When limiter is operating, output voltage is clipped.
Positive current setting range: 100 V range: +10.0 A to +42.0 A (Initial value: +42.0 A)
200 V range: +5.0 A to +21.0 A (Initial value: +21.0 A)
Negative current setting range: 100 V range:
−
42.0 A to
−
10.0 A (Initial value:
−
42.0 A)
200 V range:
−
21.0 A to
−
5.0 A (Initial value:
−
21.0 A)
Setting resolution: 0.1 A
b) Output RMS current limiter When limiter is operating, suppresses output voltage.
Current setting range: 100 V range: 1.0 A to 10.5 A (Initial value: 10.5 A)
200 V range: 1.0 A to 5.3 A (Initial value: 5.3 A)
Setting resolution: 0.1 A
9.3 Setting Range Limits
a) Voltage setting limit (When signal source mode is INT, SYNC or ADD only)
Positive voltage setting range: 100 V range: +0.1 V to +220.0 V (Initial value: +220.0 V)
200 V range: +0.1 V to +440.0 V (Initial value: +440.0 V)
Negative voltage setting range: 100 V range:
−
220.0 V to
−
0.1 V (Initial value:
−
220.0 V)
200 V range:
−
440.0 V to
−
0.1 V (Initial value:
−
440.0 V)
Setting resolution: 0.1 V
b) Frequency setting limit
(Lower limit
≤
upper limit) (When signal source mode is INT or ADD only)
Upper limit setting range: 1.0 Hz to 550.0 Hz (Initial value: 550.0 Hz)
Lower limit setting range: 1.0 Hz to 550.0 Hz (Initial value: 1.0 Hz)
Setting resolution: 0.1 Hz