NF EC1000SA, Instruction Manual

Page: 128 / 283

4.9 Amplification of External Signal
EC1000SA 4-60
4.
Press the or key to move the cursor to the output voltage range to be set, then press the
ENTER
key.
⇒
This sets the selected output voltage range.
ENTER CANCEL
5.
Press the or key to move the cursor to the icon, then press the
ENTER
key.
⇒
The modification box is displayed.
ENTER CANCEL
6. Press the and keys to move the cursor to the column to be changed, turn the MODIFY dial
and set a numerical value.
⇒
The set value is reflected immediately in the output.
Increase Decrease
7. After entering all of the values, press the
CANCEL
or
ENTER
key to close the modification box.