NF EC1000SA, Instruction Manual

Page: 24 / 283

2.2 Installation Environment
EC1000SA 2-3
2.2 Installation Environment
Note
the following precautions to ensure the safe use and reliability of this product.
Installation sites
Do not set the product on its rear, top and side when installing it on a floor or desktop.
Make sure that the four rubber feet on the bottom of the product are set evenly on a flat surface
when placed on a floor or desktop.
To prevent risk of toppling, be sure to set this product on a surface that is level and is not subject to
vibration, so that it can securely support this product weight (approximately 9.7 kg).
Cautions for transport
When transporting this product, use the grips on the left side to keep the product upright while moving
it horizontally.
When transporting this product by hand cart, mount it on a horizontal surface, so that all four rubber
feet equally support its weight.
Condensation may form inside the product when the ambient temperature or humidity changes
suddenly, for example, after transportation in winter. In such case, leave the product in room
temperature enough time to evaporate the condensation, and then connect the product to the power
source.
！ ！ ！ ！
CAUTION