NF EC1000SA, Instruction Manual

Page: 26 / 283

2.2 Installation Environment
EC1000SA 2-5
Do not install the EC1000SA in the following locations:
•
Location with flammable gas
→
An explosion may occur. Never install and use this product in such a location.
•
Outdoors, or location exposed to direct sunlight or near a fire or heat source
→
The full performance of this product may not be obtained, or failure may occur.
•
Location with corrosive gas, moisture, or high humidity
→
This product may become corroded or fail.
•
Location near an electromagnetic field source, high-voltage device, or power line
→
This product may malfunction.
•
Location exposed to excessive vibration
→
This product may malfunction or fail.
•
Location with excessive dust
→
In particular, electrically conductive dust may cause failure of this product.
This product may cause interference if used in residential areas. Such use must be avoided unless
the user takes special measures to reduce electromagnetic emissions to prevent interference to the
reception of radio and television broadcasts.