NewTek TriCaster TCXD300, User Manual

Page: 56 / 290

Page | 40
Hint: Move your mouse over Program Output , then click the Configure button (gear) that
appears above it to open a tabbed panel containing Proc Amp and Genlock settings.
4.3.2 ALL MONITORS
Click the All Monitors tab at upper left to view dedicated (ISO) monitors for all three main video
inputs, along with an array of other previews.
These include monitors showing the current playlist items in the DDR , Still and Titles modules,
and the Network source – such as an iVGA input or LiveText™ title from another computer on
the network.
Figure 31
The source currently selected on the Program row is highlighted in red. The current Preview row
selection has a green highlight, while the Effects row border selection is tinted blue.
Note that the ISO monitors are interactive :
9. Click a monitor once to select the corresponding source on the Switcher’s Preview row.
10. Click the Preview monitor again to perform a Take (swap) between the Program and
Preview row sources on output.
11. Double-click any monitor to send that source immediately to Program output.