NewTek TriCaster TCXD300, User Manual, Page: 232 / 290

Page | 216
LiveText sends output from the canvas to TriCaster’s outputs continuously while running. For
this reason, the
Live Display pane and associated tools that appear at upper-right (above the
Pages Panel) in LiveText standalone do not appear in TriCaster’s LiveText interface.
When LiveText is running, TriCaster’s video outputs (rows 1-3) will all conform to the session
format. That is, if the project is HD, the SDI outputs will all be HD, and the analog outputs will be
Component HD.
Likewise when the project is SD, the SDI outputs will all be SD. As there are multiple connection
options for analog SD video, please refer to the following table in this case:
Row Number SDI Analog BNC 1 Analog BNC 2 Analog BNC 3
1 SD Y Pb Pr
2 SD Composite Y C
3 SD Composite Y C
Note: It is possible to use LiveText’s File menu to open a project that does not correspond to the
current session settings. TriCaster will attempt to provide video output, but it’s possible that a
given monitor may not display it correctly.
17.2.2 FILES/FILEBIN
LiveText’s file dialogs (for File>Open, File>Add, File>Save and Save As) have pre-configured
QuickTabs pointing to the following default paths for the current session .
Note: the Quicktab links refer to ‘session-dependent’ paths, thus are not permanent. That is, for a
given session, the path the Quicktab refers to is established at launch time. For this reason, the
TriCaster version of LiveText does not support user-added Quicktabs.