NEC Univerge SV8100 VM8000 InMail, System Manual

Page: 20 / 388

Issue 1.0 VM8000
1 - 6 Quick Setup
H
You can optionally use 15-07-01 Programming Function Keys to assign a Voice
Mail programmable key (code 77).
H
If you don’t assign the Message key or a programmable key for Voice Mail access,
an extension user can access his mailbox by the following actions:
Ì Press Speaker key
Ì
Dial VM8000 InMail pilot number
Ì Dial mailbox number
S
ECTION
7
S
ET
U
P
A
UTOMATED
A
TTENDANT TO
A
NSWER
O
UTSIDE
C
ALLS
To enable Automated Attendant to answer outside calls, set up Direct Inward Lines
(DILs) and terminate them to VM8000 InMail.
Automated Attendant enables the following capabilities:
J
All calls are answered by Call Routing Mailbox 1 and Dial Action Table 1. This
happens because:
H Answer Table 1 Runs Monday-Friday from 8:30AM to 5:00PM, and uses Call
Routing Mailbox 1.
H At all other times, the Default Mailbox answers – also using Call Routing Mailbox 1.
J
Dial Action Table 1 allows outside callers to perform the following actions:
H Dial system extensions (if installed).
H
Dial 0 for an operator (extension 101).
H Dial * + Extension to leave a Quick Message in a mailbox.
H
Dial # + Extension to remotely log on to their mailbox.
H Wait on the line to be automatically routed to the operator.
To Set up the Automated Attendant to answer outside calls:
1. Set up trunks as Direct Inward Lines.
22-02-01 Incoming Call Trunk Setup
Assign Service Type 4 to each trunk you want to be a DIL. Make a separate
entry for each Night Service mode.
By default, trunks are Service Type 0 (Normal).