NEC Univerge SV8100 VM8000 InMail, System Manual

Page: 204 / 388

Issue 1.0 VM8000
2 - 176 Features
47-01-12 Wait Between RNA Non-Pager Callout Attempts (Notify RNA Intvl)
Set how long VM8000 InMail will wait (1~255 minutes), after it dials an
unanswered non-pager callout destination, before retrying the callout
number. The default setting for this option is 30 minutes.
There are three types of unanswered non-pager callouts:
H
If the callout rings the destination longer than the 47-01-13 Wait for Answer
Non-Pager Callout Attempts option.
H
If the destination answers, says “Hello” (or the system detects answer
supervision) and then hangs up without dialing 1 to log on to their mailbox.
This typically happens if someone unfamiliar with notification answers the
callout, or if the callout is picked up by an answering machine.
H
If the destination answers and then hangs up without saying “Hello.” This
typically happens if someone unfamiliar with the notification answers the
callout (like the above example), or if the call is picked up by an answering
machine which insufficient outgoing message volume.
The default for this option is 30 minutes.
2. Set how VM8000 InMail determines when a non-pager callout rings without
being answered.
47-01-13 Wait for Answer Non-Pager Callout Attempts (Notify RNA Rings)
If a non-pager callout rings the destination longer than this option (1~99
rings), VM8000 InMail marks the call as unanswered (Ring No Answer) and
hangs up.
The default for this option is 5 rings.
Unique Programming for Digital Pager Message Notification
1.
Set up the system-wide options that apply to the digital pager callback number.
47-01-07 Digital Pager Callback Number (Pager CBack)
Set the Digital Pager Callback Number portion of the Message Notification
callout number for a digital pager. This is the portion of the callout number
that is appended to the pager service telephone number.
By default, this option is X*M#, where:
H
X is the number of the extension that generated the notification.
H
* is a visual delimiter (to make the pager display easier to read).
H
M is the number of new messages in the extension’s mailbox.
H
# is the digit normally used by the pager service for positive disconnect.