NEC Univerge SV8100 VM8000 InMail, System Manual

Page: 280 / 388

Issue 1.0 VM8000
2 - 252 Features
Programming Department Calling Group Overflow for Screened Transfers
(TRFs)
1.
Set up the Department Group.
16-02-01 Department Group Assignment for Extensions.
Assign telephone extensions to a Department Group.
By default, telephone extensions are assigned to Department Group 1.
Assign the VM8000 InMail extensions to a unique Department Group (e.g.,
2).
No other extensions should be in this group.
These extensions are the extensions the system assigns to the VM8000
InMail.
Do not use Department Group 1.
Be sure to set up the Department Group in order. (For example, the first
extension should be order 1, the second order 2, etc.)
11-07-01 Department Group Pilot Numbers
Assign master (pilot) numbers to Department Groups.
2. In the active Dial Action Table, assign a Screened Transfer (TRF) Action to the
Department Group master number.
47-13-01 Dial Action Tables: TRF Action - Screened Transfer (1) (TRF)
The corresponding Number option should be the Department Group master
number.
For example, to allow callers to place Screened Transfers to Department
Group 1 (600), enter TRF for the Action and 600 for the corresponding
Number.
By default, there are to TRF actions assigned to Department Groups.
3. Set how long the call will ring in the Department Group before overflow occurs.
47-08-02 Screened Transfer Timeout (Scrn Trf Timeout)
For the active Call Routing Mailbox, set how long (
1~255
seconds) the
Screened Transfer from the VM8000 InMail Automated Attendant rings in
the Department Group before overflow occurs.
By default, this interval is
15
seconds.
4. Set up the Department Group Mailbox.
47-03-02 Group Mailbox Number (Mailbox Number)
The Group Mailbox number must be the same as the Department Group
master number.
By default, no Group Mailbox numbers are assigned.