NEC Univerge SV8100 VM8000 InMail, System Manual

Page: 298 / 388

Issue 1.0 VM8000
3 - 12 Programming
S
ECTION
5
P
ROGRAM
45 V
OICE
M
AIL
I
NTEGRATION
45-01 Voice Mail Integration Options
Description
Use
Program 45-01 : Voice Mail Integration Options
to customize certain voice mail
integration options.
Input Data
Item
No.
Item Input Data Default
01 Voice Mail Department Group Number
Assign which Extension (Department) Group
number is to be assigned as the voice mail
group (non-networked system).
0~64
0 = No Voice Mail
0
02 Voice Mail Master Name
Enter the Voice Mail master name
(non-networked system).
Up to 12 Characters Voice Mail
03 --- Not Used ---
04 Park and Page
Enable/disable the system ability to process the
Voice Mail Park and Page (
,
) commands. You
should normally enable this option.
0 = Off
1 = On 1
05 Message Wait
Enable/disable the system ability to process the
Voice Mail Message Wait (
#
) commands. You
should normally enable this option. If enabled,
be sure that the programmed Message
Notification strings don’t contain the code for
trunk access.
0 = Off
1 = On 1
06 Record Alert Tone Interval Time
This time sets the interval between voice Mail
Conversation Record alerts
0~64800 (sec) 30
14 CCIS Centralized Voice Mail Number
Assign the pilot number to Centralized Voice
Mail over CCIS Link. This is assigned only in
the remote switches.
Dial (up to 8 digits) No Setting
15 Analog Voice Mail Protocol Selection 0: Fixed
1: Program 0
16 Voice Mail Fax Digit Add Assignment Up to four digits None