NEC Univerge SV8100 VM8000 InMail, System Manual

Page: 100 / 388

Issue 1.0 VM8000
2 - 72 Features
6. Change the amount of time Directory Dialing callers have to dial letters.
47-15-06 Time Limit for Dialing Commands (Dialing Timeout)
Enter the new timeout duration (0~99 seconds).
If the caller waits too long to dial, the Directory Dialing Message repeats.
By default, Directory Dialing callers have 5 seconds to dial letters.
7. Record a Directory Dialing Message.
See
Operation on page 2-77 .
The Directory Dialing Message is the Instruction Menu for the Routing Mailbox
programmed as a Directory Dialing Mailbox.
By default (without a custom message recorded), the Directory Dialing Message is,
“Please enter one or more letters of the person’s name, then press the pound key.”
47-01-04 Non-Subscriber Message Length (Mbox Msg Length)
This option sets the maximum message length (1~4095 seconds) for
Instruction Menus.
By default, this option is 120 seconds.
8. Enable or disable the ability of the Directory Dialing Mailbox to detect and route
incoming faxes.
47-15-07 Fax Detection (Fax Detection)
Enter 1 to enable Fax Detection; 0 to disable. If enabled, when the Directory
Dialing Mailbox detects incoming fax CNG tone, it routes the call to the fax
extension specified in 47-01-06 Fax Extension.
See Fax Detection on page 2-93 for more.
By default, Fax Detection is disabled (N).
9. Enable the Directory Dialing Mailbox caller to dial 0 for other options or # to
return to the Automated Attendant.
47-15-08 Next Call Routing Mailbox (Next CR Mbox)
Assign a Next Call Routing Mailbox (1~32) to the Directory Dialing Mailbox.
To remove an assignment, press Hold.
Once assigned, dialing # returns to the Automated Attendant. Dialing 0
follows the 0 action of the Next Call Routing Mailbox.
By default, there is no Next Call Routing Mailbox assigned.
10. Enable Directory Dialing Mailbox to directly answer an outside call.
Make sure the active Answer Table uses the Call Routing Mailbox programmed
as a Directory Dialing Mailbox.
See
Answer Tables on page 2-29 for more.
By default, Answer Table 1 routes to Routing Mailbox 000, which is a Call Routing
Mailbox.