NEC Univerge SV8100 VM8000 InMail, System Manual

Page: 226 / 388

Issue 1.0 VM8000
2 - 198 Features
Related Features
Call Forward to a Mailbox
The Next Call Routing Mailbox dial options also apply to a subscriber’s Direct Inward Line
while it is forwarded to their mailbox.
Record and Send a Message
Turn to this feature for an explanation of the options a caller can dial while recording.
Programming
Programming Subscriber Mailboxes
1.
Assign the Next Call Routing Mailbox to a Subscriber Mailbox (if required).
47-02-14 Next Call Routing Mailbox (Next CR Mbox)
Specify the Routing Mailbox (1~32) that should provide the caller leaving a
message with additional dialing options.
By default, this option is 1 (Call Routing Mailbox 1).
2. Optionally allow the caller to dial additional digits (not just 0) once in the Next
Call Routing Mailbox.
47-02-13 Dialing Option (Dialing Option)
Enter 1 to enable additional dialing options.
By default, this option is disabled (0).
1~32 (valid
Call Routing
Mailbox)
x (x number of
repeats)
0 = None
1 = Goodbye
2 = Silent
o
If caller doesn’t dial, they hear the
announcement x number of times and
then route to the Next Call Routing
Mailbox.
o
If the caller dials a digit during the
announcement, they route to the Next
Call Routing Mailbox.
0 = None
1 = Goodbye
2 = Silent
o
If caller doesn’t dial, they hear the
announcement x number of times and
then VM8000 InMail hangs up.
o
If the caller dials a digit during the
announcement, they route to the Next
Call Routing Mailbox.
Routed Announcement Mailbox Routing (Continued)
(If outside caller routes to Announcement Mailbox from Call Routing Mailbox)
47-09-01
Next Call
Routing
Mailbox
47-09-02
Repeat
Count
47-09-03
Hang Up
After
Action