NEC NEFAX655e Manual Download Page 95

Page: 95 / 202

RX Operation

Facsimile Programming

4 - 36

RX Mode

This function is used to set the mode in which the facsimile machine receives the
document.

Press the Program key and scroll through the
menus until you reach the RX Operation Menu.
Press YES to begin programming.

Press 7 or scroll down to the Closed Network menu
and press YES.

Using the Left and Right arrows, select the option
you wish to have as the default, and press YES to
enter this selection into memory.

Footer (Receive Time Print)

The footer is printed at the bottom of each page received showing the receiving machine
fax number, date and the time of reception, the sender fax number, the reception control
number, and page number.

Press the Program key and scroll through the
menus until you reach the RX Operation Menu.
Press YES to begin programming.

Press 8 or scroll down to the Closed Network menu
and press YES.

Using the Left and Right arrows, select the option
you wish to have as the default, and press YES to
enter this selection into memory.

Note: Your Service Technician can set this to
print either inside or outside the message area.

Choices Available

Description

AUTO

In this mode, the facsimile machine will automatically answer the
phone call and receive the document.

MANUAL

In this mode, the facsimile will not automatically receive the
document. The user must answer each call manually.

RX OPERATION?
YES / or 1-9

7 RX MODE?
OK=YES

*AUTO MANUAL
-SELECT&PUSH”YES”-

RX OPERATION?
YES / or 1-9

8 FOOTER?
OK=YES

ON *OFF
-SELECT&PUSH”YES”-

Summary of Contents for NEFAX655e











































































































































































































Search results

Summary of Contents for NEFAX655e

Reviews:

Related manuals for NEFAX655e

Brands by name

Popular brands

NEC NEFAX655e, Manual

Search results

Summary of Contents for NEFAX655e

Reviews:

Related manuals for NEFAX655e

Brands by name

Popular brands