NEC NEFAX655e Manual Download Page 75

Page: 75 / 202

Document Scan Settings

Facsimile Programming

4 - 16

Rec. Paper Size

This function allows you to choose the recording paper size in Tray 1 (standard Paper
Cassette) and the optional Tray 2 (2nd Paper Cassette).

Press the Program key and scroll through the
menus until you reach the SCANNING &
PRINTING Menu. Press YES to begin
programming.

Press 5 or scroll down to the Rec. (Recording)
Paper Size menu and press YES.

When the optional 2nd Paper Cassette is installed,
select HIGH-TRAY for the standard Paper
Cassette, LOW-TRAY for the 2nd Paper Cassette.

Using the Left and Right arrows, select the size you
wish to have as the default and press YES to enter
this selection into memory.

Auto Cassette Sel.

Allows users to select the 2nd paper cassette to print out the document when the
facsimile is equipped with the 2nd paper cassette. Users can set the received FAX or
printed PC document to be printed out from either the Upper or Lower Tray.

Press the Program key and scroll through the
menus until you reach the Set Printer menu and
press YES.

Press 1 or YES to enter the Auto Cassette Sel. menu.

Press YES to go to Auto Cassette Selection.

Note: The Optional 2nd Paper Cassette must be
installed. If it is not installed, you will receive
this message.

SCANNING&PRINTING?
YES / or 1-5

5 REC. PAPER SIZE?
OK=YES

*LOW-TRAY HIGH-TRAY
-SELECT&PUSH”YES”-

A4 *LETTER LEGAL
-SELECT&PUSH”YES”-

SET PRINTER?
YES / or 1-8

1 AUTO CASS. SEL.?
OK=YES

*NOT AVAILABLE*

Summary of Contents for NEFAX655e











































































































































































































Search results

Summary of Contents for NEFAX655e

Reviews:

Related manuals for NEFAX655e

Brands by name

Popular brands

NEC NEFAX655e, Manual

Search results

Summary of Contents for NEFAX655e

Reviews:

Related manuals for NEFAX655e

Brands by name

Popular brands