NEC NEFAX655e Manual Download Page 129

Page: 129 / 202

Set Printer

PC Printing & Scanning

6 - 4

Line Number

Allows users to set the total lines for each printed page. You can set any number
between 5 and 127 lines per page.

Note: In most cases, PC software settings override this setting.

Press the Program key and scroll through
the menus until you reach the Set Printer
menu and press YES.

Press 5 or scroll down to the Line Number
menu and press YES.

Enter the number of the lines per page you
wish to have as your default. Press YES to
accept this data into memory.

Print Font

Allows the user to print samples of the fonts resident in the machine for
reference.

Press the Program key and scroll through
the menus until you reach the Set Printer
menu and press YES.

Press 6 or scroll down to the Print Font
menu and press YES.

The unit prints the list of available fonts. It
also gives a sample of each.

SET PRINTER?
YES / or 1-8

5 LINE NUMBER?
OK=YES

LINE NUMBER=_64
OK=YES (DEL=NO)

SET PRINTER?
YES / or 1-8

6 PRINT FONT?
OK=YES

*PRINT FONT*

Summary of Contents for NEFAX655e











































































































































































































Search results

Summary of Contents for NEFAX655e

Reviews:

Related manuals for NEFAX655e

Brands by name

Popular brands

NEC NEFAX655e, Manual

Search results

Summary of Contents for NEFAX655e

Reviews:

Related manuals for NEFAX655e

Brands by name

Popular brands