NEC NEFAX655e Manual Download Page 141

Page: 141 / 202

Scanning (TWAIN Driver Option)

PC Printing & Scanning

6 - 16

Scanner Troubleshooting

When your unit encounters trouble while scanning, an error message appears on
the LCD display. Consult the following table to correct the problem.

Message

Cause

Solution

Place Original

There are no documents in the
ADF, or the ADF is in use.

Place your document in the
ADF.

Document Jam

A document is jammed in the ADF. Remove the document. Place it

back in the ADF.

Communication Error, Check
Setting/Scanning Table

The interface cable is not
connected or the unit is OFF.

Connect the cable securely.
Make sure the power is on. You
may need to check and correct
the communication settings in
the Option menu.

Unable to scan image

The unit is performing an operation
and is not in the image scanning
mode.

Wait for the unit to finish the
operation.

Scanning error code:XXXXXX

An error occurred during image
scanning.

Reset the computer and your
NEFAX655e unit.

File access error

Captured images cannot be stored.

The destination disk is
considered short on available
space. Secure space enough to
store the images.

Summary of Contents for NEFAX655e











































































































































































































Search results

Summary of Contents for NEFAX655e

Reviews:

Related manuals for NEFAX655e

Brands by name

Popular brands

NEC NEFAX655e, Manual

Search results

Summary of Contents for NEFAX655e

Reviews:

Related manuals for NEFAX655e

Brands by name

Popular brands