NEC NEFAX655e Manual Download Page 111

Page: 111 / 202

Setting up the Internet Fax

Internet Fax(Option)

5-6

ERROR REPORT

Press the Program key and scroll through the
menus until you reach the Internet Fax menu and
press YES.

Use the Up/Down Arrow keys to the ERROR
REPORT menu then press YES.

Use the Left/Right Arrow keys to select ENABLE
and press YES. This report can be used to check
whether Internet Fax has been successful.

TIME ZONE

Press the Program key and scroll through the
menus until you reach the Internet Fax menu and
press YES.

Use the Up/Down Arrow keys to the TIME ZONE
menu then press YES.

Use the e.g. Eastern Standard time is -05:00, or 5
hours behind GMT. E-mail server use this time to
indicate when a message is sent. Press “YES” after
entering the correct time.

INTERNET FAX?
YES / or 1-6

5 ERROR REPORT?
OK=YES

*ENABLE DISABLE
-SELECT&PUSH”YES”-

INTERNET FAX?
YES / or 1-6

6 TIME ZONE?
OK=YES

Time Zone= GMT + 00:00
&YES

Summary of Contents for NEFAX655e











































































































































































































Search results

Summary of Contents for NEFAX655e

Reviews:

Related manuals for NEFAX655e

Brands by name

Popular brands

NEC NEFAX655e, Manual

Search results

Summary of Contents for NEFAX655e

Reviews:

Related manuals for NEFAX655e

Brands by name

Popular brands