manualshive.com logo in svg

NEC NEFAX655e, Manual

Share
Download
NEC NEFAX655e Manual Download Page 86

TX Operation

4 - 27

Facsimile Programming

TX Operation

Default TX

This function sets the default TX mode of the fax unit. Two options are available:

Note:  In Memory Transmission Mode, you can retrieve your original document 
sooner than you can in ADF TX (Direct Transmission) Mode.

1

Press the Program key and scroll through the 
menus until you reach the TX Operation Menu. 
Press YES to begin programming.

2

Press 1 or scroll down to the Default TX menu and 
press YES.

3

Using the Left and Right arrows, select the option 
you wish to have as the default, and press YES to 
enter this selection into memory.

Choices Available

Description

Memory TX

When the unit is set in this mode, documents are scanned into 
memory for transmission and dialing starts after the first page is 
scanned (Quick TX).

ADF TX (Direct 
Transmission)

When the unit is set in this mode, documents are scanned for 
transmission after connection has been made to the receiving unit. 
(When the available memory is insufficient, select ADF TX for a 
successful transmission)
If the Fax line is not available, the message “LINE IS BUSY” will be 
displayed. The facsimile will retry to resend based on the number of 
redial attempts and intervals that were preset.

TX OPERATION?
  YES / or 1-4

1 DEFAULT TX?
  OK=YES

*MEM TX         ADF TX
 -SELECT&PUSH”YES”-

Summary of Contents for NEFAX655e











































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands