manualshive.com logo in svg

NEC NEFAX655e, Manual

Share
Download
NEC NEFAX655e Manual Download Page 25

Machine Components

Introduction

1 - 12

Definition of Display Symbols

The LCD shows the date, time of day, amount of memory available for use, fax 
numbers, fax conditions, and other information by means of either a message or 
graphic. The following table is a list of icons that can appear on the LCD.

Signifies a fax or telephone 
number.

Shown while the remote fax 
number is being rung.

Prompts you to enter a fax 
number.

Shown while the user’s local fax is 
being rung.

Indicates the pause function is set 
into the destination fax number. 
Example: 0P412641267

Indicates the number of pages.
Example: A single page.

Indicates when the Internal PBX 
function is set into the 
destinations fax number.

Shown while a document is being 
transmitted to the other party.

Indicates when the Sub Address 
is set into the destination fax 
number.
Example: 4126412:8108

Shown while a document is being 
received from the other party.

Indicates that a polling 
transmission function has been 
stored in memory.

Indicates that a document to be 
transmitted by the timer 
transmission function has been 
stored in memory.

Indicates when the External PBX 
to PSTN function is set into the 
destination fax number

Summary of Contents for NEFAX655e











































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands