NEC NEFAX655e Manual Download Page 108

Page: 108 / 202

Setting up the Internet Fax

5-3

Internet Fax(Option)

Setting up the Internet Fax

E-MAIL SETTING

Press the Program key and scroll through the
menus until you reach the Internet Fax menu and
press YES.

Press YES

Enter the name to be used on your E-mails. This
name appears in the “FROM” heading of your
message.

Enter the E-mail address, then press YES

Enter the account name for your unit. This is the
name of the mailbox at the E-mail server. Then
press YES.

Enter the password of the account name. It allows
your unit to log into the POP3 server to receive E-
mail.

Enter the E-mail address that a remote machine will
reply to when they select “Reply” in their E-mail
program. Press YES to enter this selection memory.

INTERNET FAX?
YES / or 1-6

1 E-MAIL SETUP?
OK=YES

NAME=
OK=YES (DEL=NO)

E-MAIL=
OK=YES (DEL=NO)

ACCOUNT=
OK=YES

PWD=
OK=YES (DEL=NO)

ERR.REP=
OK=YES (DEL=NO)

Summary of Contents for NEFAX655e











































































































































































































Search results

Summary of Contents for NEFAX655e

Reviews:

Related manuals for NEFAX655e

Brands by name

Popular brands

NEC NEFAX655e, Manual

Search results

Summary of Contents for NEFAX655e

Reviews:

Related manuals for NEFAX655e

Brands by name

Popular brands