manualshive.com logo in svg

NEC NEFAX655e, Manual

Share
Download
NEC NEFAX655e Manual Download Page 82

Dial Registration

4 - 23

Facsimile Programming

For 7 = Polling RX:

5

A screen appears to confirm Polling RX was your 
selection.

6

Enter the number of the Mailbox you wish use and 
press YES.

Once this function has been programmed, you use it by simply pressing the One-Touch 
key you have just programmed. This is documented in Chapter 3 Advanced Facsimile. 

For 8 = Relay Initiate:

5

A screen appears to confirm Relay Initiate was 
your selection.

6

Enter the telephone number.

7

Enter the 20-digit Relaybox ID.

8

Enter the 20-digit Relaybox password.

Once this function has been programmed, you use it by 
simply pressing the One-Touch key you have just programmed. This is documented in 
Chapter 3 Advanced Facsimile. 

Edit/Deleting

1

If you wish to change any entry, a screen allows you to accept it or change it.

2

If you wish to change a Key that was previously 
programmed, this message appears. Press YES to 
keep this location as is, or NO if you wish to edit it.

POLLING RX

NO.001=_

RELAY INITIATE

        ENTER FAX NO.

RELAYBOX ID=
   OK=YES     (DEL=NO)

PASSWORD=
   OK=YES     (DEL=NO)

REGISTERED!    KEEP?
OK=YES (EDIT/DEL=NO)

Summary of Contents for NEFAX655e











































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands