NEC NEFAX655e Manual Download Page 91

Page: 91 / 202

RX Operation

Facsimile Programming

4 - 32

To select Memory RX ON, use the left and right
Arrow keys to select ON and press YES.

Enter the time you wish to start receiving messages
into memory.

Note: If the ON and OFF time are identical,
messages will always be received into memory.

Enter the time you wish to stop receiving messages
into memory.

You must enter a password for this to work.

If you have your unit programmed for Memory RX
with the Timer turned ON and a Password required,
your screen displays the following message.

The ready message for your unit now indicates that
Memory RX is active.

*ON OFF
-SELECT&PUSH”YES”-

ON TIME=_0:00
OK=YES

OFF TIME=_0:00
OK=YES

PASSWORD=
OK=YES

*M-RX-ON*
<T><PWD>

<<M-RX>> 100%
-SET DOC.FACE DOWN-

Summary of Contents for NEFAX655e











































































































































































































Search results

Summary of Contents for NEFAX655e

Reviews:

Related manuals for NEFAX655e

Brands by name

Popular brands

NEC NEFAX655e, Manual

Search results

Summary of Contents for NEFAX655e

Reviews:

Related manuals for NEFAX655e

Brands by name

Popular brands