NEC NEFAX655e Manual Download Page 67

Page: 67 / 202

Machine Operations

Facsimile Programming

4 - 8

Setting the Buzzer (Ring) Volume

Use this to set the ring volume to the suited level.

Press the Program key and scroll through the
menus until you reach the Machine Operations
menu and press YES.

Press 3 or press the down arrow twice to reach the
Buzzer Volume Menu. Press YES.

Use the Left/Right Arrow keys to select either
HIGH, LOW or OFF and press YES.

Choices Available

Description

HIGH

Buzzer Volume is set at the loudest setting available.

LOW

Buzzer Volume is set at the lowest setting available.

OFF

No sound will be heard.

MACHINE OPERATION?
YES / or 1-9

3 BUZZER VOLUME?
OK=YES

HIGH *LOW OFF
-SELECT&PUSH”YES”-

Summary of Contents for NEFAX655e











































































































































































































Search results

Summary of Contents for NEFAX655e

Reviews:

Related manuals for NEFAX655e

Brands by name

Popular brands

NEC NEFAX655e, Manual

Search results

Summary of Contents for NEFAX655e

Reviews:

Related manuals for NEFAX655e

Brands by name

Popular brands