NEC NEFAX655e Manual Download Page 122

Page: 122 / 202

Error Messages

5-17

Internet Fax(Option)

LCD Display Messages

•

*NIC NOT EXIST*

This message indicates that the machine cannot detect a network connection.

•

*NIC TIME OUT*

This message indicates that the NIC did not establish communication with the
E-mail server before the programmed Time Out interval was reached.

•

*NO-EMAIL*

This message indicates that no new E-mail found in mailbox for the e-mail
server.

•

*I-FAX ERROR REPORT*

This message indicates that the machine encountered an error when processing
the received E-mail. It will appear while the Error Report is printing.

•

*PASSWORD ERROR*

This message indicates that the password entered is incorrect.

•

*MAILBOX MEMORY FULL*

This message indicates that the mailbox for the e-mail server is too full to
receive mails.

•

*CAN’T CONNECT SMTP*

This message indicates that the machine could not connect to the SMTP server.

•

*CAN’T CONNECT POP3*

This message indicates that the machine could not connect to the POP3 server.

•

*SMTP COMM. ERROR*

This message indicates that the SMTP protocol command error.

•

*POP3 COMM. ERROR*

This message indicates that the POP3 protocol command error.

•

*SMTP TIME OUT*

The command timeout of SMTP protocol.(TX)

•

*POP3 TIME OUT*

The command timeout of POP3 protocol.(RX)

•

*MIME ERROR*

This message indicates that the machine only receives TIFF file and txt-format
file. It cannot receive files in other formats.

Summary of Contents for NEFAX655e











































































































































































































Search results

Summary of Contents for NEFAX655e

Reviews:

Related manuals for NEFAX655e

Brands by name

Popular brands

NEC NEFAX655e, Manual

Search results

Summary of Contents for NEFAX655e

Reviews:

Related manuals for NEFAX655e

Brands by name

Popular brands