manualshive.com logo in svg

NEC NEFAX655e, Manual

Share
Download
NEC NEFAX655e Manual Download Page 115

Setting up the Internet Fax

Internet Fax(Option)

5-10

Program Dial

1

Press the Program key and scroll through the 
menus until you reach the DIAL REGISTRATION 
Menu. Press YES to begin programming.

2

Press 4 or scroll down to the Program Dial menu 
and press YES.

3

Press the One-Touch key you wish to use. 
Remember, it must be one of the last eight.

4

Choose the function you wish to program:
1=Broadcast, 2=Timer TX, 3=Mailbox TX, 
7=Polling RX, and 8=Relay Initiate.When you 
want to use Internet Fax, you just choose the 
function 1=Broadcast and 2=Timer TX.

Note:  To continue with this process, choose the group of steps that match your needs.

for 1=Broadcast

5

A screen appears to confirm Broadcast was your 
selection.

6

Press the Mail and enter the E-mail address. You 
can also include any One-Touch or Speed Dial key 
in this group.

7

You can select “TO” or “C.C.” for the message to 
this location.

8

Continue to enter the E-mail address you wish to 
include and then save.

DIAL REGISTRATION?         
  YES / or 1-6                

4 PROGRAM DIAL?  
   OK=YES

-SELECT REGIST.KEY-

FUNCTION
SEL. 1/2/3/7/8

BROADCAST

NO.001=_

TO=
       (TO=YES,CC=PROG)

NO.002=
                        (FIN.=START)

Summary of Contents for NEFAX655e











































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands