NEC NEFAX655e, Manual

Page: 143 / 202

Class 1 Fax/Modem
PC Printing & Scanning 6 - 18
Connecting Class 1 to Your PC
The NEFAX655e uses a standard RS-232C port to communicate with the PC.
Follow the instructions in “Attaching the PC Cables” on page A-8 to connect the
cable if you have not already connected it.
Please Note: This feature is optional on your unit.
Installing the PC-Fax Software
There are a number of settings that affect the modem. This table provides a list of
common settings and the preferred NEFAX655e settings.
Using Class 1 Mode
Note these considerations when using Class 1 mode:
•
When your unit communicates with the computer, “CLASS 1 MODE”
appears on the LCD.
•
No other fax activities can be performed while the unit communicates
with the PC.
•
During a fax operation initiated by your unit, a fax request initiated by
the PC is not processed.
•
The maximum fax transmission speed is 14,400 bps in Class 1 mode.
Modem type Generic Class 1 or Class 1
Flow control Xon/Xoff
Dial type Use the type that matches your telephone service. This selection
determines whether the dial command is ATDT for tone or
ATDP for pulse.
Dial tone detect OFF
Detect busy OFF. Your unit detects a busy signal and provides the correct
response. If the remote unit does not answer, the fax unit
responds “No carrier” on the computer, which can then schedule
a re-dial.
Speaker On/Off and volume OFF