Parameter
Description
END
(Knob 3)
Adjusts the end point of the loop.
XFADE
(Knob 4)
Allows you to blend a little of the material near the loop start and
end points in order to get a smoother, less abrupt loop. This is
particularly helpful if the loop is inducing any clicks.
Hold
SHIFT
when turning the Knobs to adjust the parameters in finer increments.
By moving the loop’s start and end points closer to each other you can shrink the loop to
very small values on-the-fly, thereby creating very interesting glitch effects in a live sit-
uation.
Page 3 – TUNE / MIX Parameters
The
TUNE / MIX
page contains parameters controlling pitch- and level-related aspects of the
Sample playback.
Parameter
Description
TUNE
(Knob 1)
Sets the tuning of the focused Zone.
GAIN
(Knob 2)
Sets the gain of the focused Zone.
PAN
(Knob 3)
Sets the panorama position of the focused Zone.
ROOT KEY
(Knob 4)
Adjusts the root key of the focused Zone, that is the key at which the
Sample will be played back at its original pitch.
Page 4 – ENVELOPE Parameters
This amplitude envelope can be used to get rid of clicks after slicing; you can either apply it to
the Zone of the whole Sample or to individual Zones for selected Slices.
Sampling and Sample Mapping
Mapping Samples to Zones
MASCHINE 2 - Manual - 649
