Element
Description
Decay
Adjusts the duration of the sound’s tail, measured as a percentage.
Available values range from 0.0 to 100.0 % (default: 50.0 %).
Skin Tune
Adjusts the fine-tuning of the skin of the drum, measured as a
percentage. Available values range from 0.0 to 100.0 % (default:
50.0 %).
Impact
Adjusts how hard the drum is hit, measured as a percentage.
Available values range from 0.0 % (softest) to 100.0 % (hardest).
The default value is 75.0 %.
Body
Adjusts the level of the snare body independently from level of the
snare wires, which is adjusted on the
Advanced
page (see below).
Available values range from 0.0 to 100.0 % (default: 75.0 %).
Advanced Page
The
Advanced
page contains parameters controlling the wires’ sound of the drum.
Element
Description
SPECTRA Section
Mode
Selects from two different noise types that simulate the snare wires
of the drum. Available modes are
A
(default) and
B
.
Decay
Controls the length of the snare wires’ sound independently from
the main
Decay
parameter on the
Main
page. Available values range
from 0.0 to 100.0 % (default: 40.0 %).
Amount
Adjusts the amount of snare wire sound applied to the drum,
measured as a percentage. Available values range from 0.0 to
100.0 % (default: 75.0 %).
Modulation Page
As with all other engines and Drumsynths, the
Modulation
page contains one parameter:
Veloc-
ity
.
Using the Drumsynths
The Snares
MASCHINE 2 - Manual - 414
