▪
The Retrigger setting lets you decide where the next loop will start:
◦
If Retrigger is enabled, the next Scene that is selected will be forced to play from the
start. This is useful if you always want your Scenes to play from the beginning regard-
less of what’s happening elsewhere in the music.
◦
If Retrigger is disabled (default setting)
,
the next Scene that is selected will play from
the same offset to the beginning of the Scene: e.g., leaving the current Scene on beat
3 will cause the new Scene to start playing on its beat 3. This ensures that the global
groove of your track is not interrupted!
In the software, the Perform Grid and the Retrigger setting can be adjusted in the MASCHINE
Header:
Adjusting the Perform Grid and Retrigger setting.
►
To adjust the Perform Grid, click the value left of the
SYNC
label in the MASCHINE
Header and select the desired division from the menu:
→
The next time you select a new Scene or group of Scenes for looping, the switch will hap-
pen on the next division selected here.
►
To enable/disable the Retrigger setting, click the little cog wheel in the MASCHINE
Header and select
Retrigger
from the menu.
Creating a Song Using Scenes
Playing with Scenes
MASCHINE 2 - Manual - 598
