Side-Chain Input Page
The Compressor in the Control area: Side-Chain Input page.
Parameter
Description
INPUT Section
Source
Selects the audio signal you want to use as side-chain signal to
control the Plug-in. Available options are
None
(side-chain
disabled, default setting), the outputs of all (other) Sounds , and
the outputs of all (other) Groups.
In the menu these outputs are labeled as follows:
For Groups: [Group name] (e.g.,
Drums
)
For Sounds: [Group name]: [Sound name] (e.g.,
Drums: Kick
)
In the selector display these outputs are labeled as follows:
For Groups: [Group name] (e.g.,
Drums
)
For Sounds: [Group number]:S[Sound number] (e.g.,
A1:S4
for
the Sound 4 of Group A1)
Gain
Adjusts the input level of the side-chain signal fed into the Plug-in.
FILTER Section
Filter
Activates a filter on the side-chain input. This filter can be useful to
select only a specific frequency range of the side-chain signal to
control the Plug-in.
Center Freq
Adjusts the center frequency of the filter.
Width
Adjusts the bandwidth of the filter.
Effect Reference
Dynamics
MASCHINE 2 - Manual - 482
